Bolero Wireless Intercom System in AES67 Networks

Presenters : Rick Seegull - Riedel

Year : 2019

dlp_document_download : How to Build a BoleroStandalone System In the next few minutes, some of you will assemble the basic Bolero hardware components into a working system –fastest time, WINS!But first, a general overview of BOLERO Artist 128Artist 64Artist 32Modern CodecADRPlug & Play RegistrationAES67 NetworkingRedundant Power10 Beltbacks/AntennaSystem IslandsDesktop PanelBottle OpenerSix ChannelWalkie-Ta l k i e M o d eWorks EverywhereBolero: Best-in-Class Features! TWOtechnologies are used to improve multipath performance Antenna / Receiver DiversityAdvanced DECT ReceiverMultipath Suppression ProcessingSpatial & Pattern DiversityBeltpackAntennaThe advanced DECT receiver differentiates between multipath reflections to cancel group and phase delay, increasing the s/n ratio of the RF layer.Multipath ToleranceResulting in best-in-class RF reflection tolerance! 10 x beltpacksper antenna with roaming12345689107Modern CodecBolero uses the BV32 codec: modern, low latency, & high clarity Simple Plug & Play RegistrationMethod 1Method 2Method 3Beltpackto Antenna NFCBeltpackto BeltpackNFCBeltpackover the Air Three Modes of Operation AES67 Integrated Mode Standalone/Link Mode Standalone 2110 (AES67) Mode 1stContestant!Me! Step 1 –Connect PC & Power Antenna•Plug AC adapter into the antenna•Run Ethernet cable from PC to Antenna AES67/Config Port•Wait for it to power up•Note the IP address on antenna e-ink display•Open a Browser window (expand to full screen) and enter IP Address as shown to launch Bolero Web UI •Select the Unassigned Antenna•Click on the +and select Create Network Space•NAME= AES-2019•System Mode= Standalone/Link•Admin PIN = 0000•Click ApplyStep 2 –Create Network Space •Select the Lockedsymbol and enter the pin 0000 to unlock and select OK•Click on the +and select Registration Mode•NFC= ON•Enable Timeout = OFF•Click ApplyStep 3 –Register the Belt Packs •Place the NFC logo of the Beltpackonto the NFC logo of the Antenna•The Beltpackshould vibrate indicating it is registeredStep 3 –Register the Beltpacks Step 4 –Edit Beltpacks•Select Beltpacksalong the top•Click the pencil icon to edit BP#1•Name = FOH•User Id = 1•Select Apply and Close•Repeat for BP#2•Name = Stage•User Id = 2•Select Apply and Close Step 5 –Edit Partyines•Select Partylinesalong the top•Click the pencil icon to edit Partyine#1•Name = Lights•Click Apply Step 6 –Edit Beltpacks•Go back to Beltpacks•Click the pencil icon to edit BP#1•Select Keysalong the top•Set Key 1 Mode = Momentary•Set Key 2 Destination = Beltpack–Stage•Select Apply & Close•Repeat for BP#2•Set Key 1 Mode = Momentary•Set Key 2 Destination = Beltpack–FOH•Select Apply & Close We need 2 volunteers What you’ll need…